![[]](/sites/all/modules/ubercart/uc_cart/images/bullet-arrow-up.gif "Expand cart block."){kind=icon}
There are no products in your shopping cart.
SoftRock and other SDR Radios SoftRockRadio.org - DSPRadio.org -SmallSDR.org - "Elegance through simplicity of design ".
|
|
||||
|
Navigation User login The Parts Place Recent blog posts
Poll |
Submitted by pa0akv on Mon, 03/31/2008 - 14:49.
I discovered why the photo can't be seen! I placed the html page on the url instead of the filename of the photo!! Stupid me. The first photo is the 40m pcb mounted in a small box 60*40* 25 mm This box is also made with the CNC milling tool, see the next photo. To milling tool is made from a standard PROXON MF70 $200,-- I added three stepping motors and three stepping controllers and a standard 2A 12V power supply. Now I can controll the X-Y and Z axis. For frontplate drawings and conversion to CNC code I am using Frontmaker about $75,-- and KCAM about $100,-- software. For milling PCB's I use Sprint Lay-out about $50,-- and after conversion the issolation milling file to CNC code the 0,7 mm mill will do the rest.
|
Who's online There are currently 0 users and 3 guests online.
Recent comments
|
||
There is a way of inserting
Submitted by k5nwa on Thu, 04/03/2008 - 09:15.There is a way of inserting a photo that on in the Internet without copying it into this server, I will need to add that to the procedure on adding photos. You can see an example in the test area, but you can't see how I did it.
By the way that is a nice setup, great for making front panels.
Cecil
k5nwa
"Blessed are the cracked since they shall let the light in"